The vibratory screen gold processing truck is a mobile gold beneficiation equipment integrating vibratory screening technology into gold mining operations. Its core function is to classify ore efficiently via the vibratory screen, widely applicable to placer gold mining on land and partial water areas. Details are as follows:
1. Core Structure
Basic configuration: Standard mobile chassis for gold mining, water supply system, gold sluice, etc.;
Core system: Intelligent vibratory screen system (usually double-layer screen structure, some models with vibration bin);
Auxiliary devices: Some models are equipped with mud washing & high-pressure spray devices before/after the vibratory screen, suitable for high-mud-content ores.
2. Working Process
Feeding: The gold-bearing sand and gravel are fed into the hopper by the reloader, and large waste is preliminarily screened out to reduce equipment wear;
Screening: Qualified materials enter the vibratory screen, and are classified by high-frequency vibration to separate coarse stones and fine sand-gold ore;
Concentration: Fine ore is conveyed to the sluice, washed by spray and then flows into sluice/chute plates. Gold particles are concentrated by density difference;
Recovery: Some models support secondary separation to further improve gold recovery rate.
3. Product Parameter Table
Item
Model 150
Overall Size (m)
7.5×2.2×4
Processing Capacity (t)
20-150
Max. Particle Size (mm)
100-300
Screen Size (mm)
1640×2
Screen Material
Mn-steel Punch + High-Mn Steel Wire
Hopper Size
2500×2200
Working Mode
Direct Drive
Power (kW)
15
Generator Set
Optional
4. Product Advantages
High Efficiency: Real-time adjustment of vibration frequency & amplitude avoids screen blockage; gold recovery rate reaches 80%-92%(critical for profit);